Draw Tite Activator 2 Manual. Read and follow all instructions carefully before installing or operating the brake control. Draw tite activator 2 manual.pdf size:
Activator Trailer Brake Controller Wiring Diagram Paintcolor Ideas from zvcf-jane-krakowski-thong.blogspot.com
Of wires, one row has four wires (inside row) the other has. Connect the black wire to the “ aux” side of the circuit breaker with a ring terminal. Read and follow all instructions carefully before installing or operating the brake control.
4 May 2019, 12:45 Pm Rating:
If no trailer braking is felt adjust the output control slightly to the left. • with the output control still set at maximum, slowly activate the. Of wires, one row has four wires (inside row) the other has.
Wire As Shown At Right.
While watching the test bulb, hold the red wire on the positive (+) battery terminal. Read and follow all instructions carefully before installing or operating the brake control. Read and follow these instructions carefully.
In Order To Read Or.
Keep instructions in your tow vehicle for future reference. The wire needed is the light green wire, second in from the. Setup preliminary adjustments with the trailer connected press and hold the brake pedal, the display will show the output setting.
Using The Wire Tap Provided, Splice The Brake Control's Red.
Web bench test instructions 1. Connect the black wire to the “ aux” side of the circuit breaker with a ring terminal. If you have any questions about this free online manual, don’t hesitate to ask minedit down below.
Web Manual Control The Manual Control Is Located On The Front Of The Brakecontrol Unit At The Right Side.
Web using the other (2) self tapping screws as shown in the illustration. Web if you’re looking for the draw tite activator ii manual, you’ve come to the right place. Starting with the output control in the lowest position (all the way right) roll forward slowly and stop.
